|
GO-Jak RJPIV Pivoting Jack Pad - The pivoting and self-aligning jack pad* is really handy for side lifting. The set includes three jack pads. A pad that is less than an inch in height is permanently installed first and will reduce the overall collapsed height to 4-7/8" on the DBT2. The modified standard size DBT2 jack pad nests around the permanently installed pad. The self-aligning pad nests in the same manner. These pads are interchangeable in seconds without tools to save time and offer the flexibility of a variety of jack pad heights and styles. The pivoting and self-aligning jack pad distributes the load evenly from end to end on its 12-inch wide platform. The pivoting action will adjust as the vehicle is being lifted. This pivoting action continuously distributes the load. Its large rubber pad protects the lifting surface and helps stabilize the load. Air Bag Jack Not Included.
*Please note that the pivoting jack pad is for side lifting only under the rocker panel or pinch weld and the place to be lifted under the car must stay in continuous contact with the full 12 inches of the pad. Adequate testing must be performed to insure a secure position and that no vehicle damage will occur. This jack pad should never be used on cross members, suspension parts, frame rails or any part under the car other than the rocker panel or pinch weld.
- Grade A Tools 30 Day Money Back Guarantee. After 30 Days Manufacturer Warranty Applies. (See terms and conditions).
|
Shop by Brand
