Join our mailing list!

  Home > Shop by Brand > Martech >

  Martech 79035 The Solution with 35' Hose
  Martech 79035 The Solution with 35' Hose
 
Sale Price $6,495.00

Special Instructions: $50 Minimum Order for Martech Products

Availability:: Usually Ships in 24 to 48 Hours
Product Code: MTK-79035
Qty:

Description
 
Martech 79035 Cleaning, drying, and heating the atomizing air from your existing compressed air source can be accomplished with The Solution by Martech Services Company.  The four-stage filtration is outfitted with an automatic moisture discharger.  Then the clean air is further filtered to remove moisture content for super dry air.  A controller, with digital outputs, allows user to set the temperature of the atomizing up to 165 degrees F.  The Solution is shipped complete with a 3/8” ID x 35’ spray air hose.  The Solution is a complete compressed air system designed to clean, dry, and heat the atomizing air for today’s spray paint requirements.  It is easy to use, simple to install, and affordable to maintain.   Works well with both waterborne and solvent based paint systems.
Features
  • Easy to install, on the exterior of a new or existing spray booth
  • Works with the existing compressed air system
  • Provides clean, dry, filtered air to .01 micron
  • Maximum sweep air of only 3% to 4%
  • Easy, low cost maintenance of the four-stage filter
  • Automatic moisture discharger, standard
  • Panel mounted, ready to install, includes all necessary fittings
  • Self-relieving pressure regulator with gauge
  • Operates on 110 VAC with less than 4 amp draw
  • Digital control panel to set the atomizing air temperature from 100° F to 165° F
  • 35' x 3/8" heated hose assembly with 1/4" NPT large bore male end
  • System on/off control with LED indicator lamp
  • Flow rate at a maximum of 35 CFM
  • Maximum input pressure of 150 PSI

Accessories for this product...
79090 The Solution - Service Kit
Sale Price $360.00
Add
Martech 79090 The Solution - Service Kit

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop by Brand > Martech
Air Supply > Breathing Systems
Auto Body Paint > Breathing Systems


Martech 78225 Abrasive Blast System with 50' Hose $1,049.00
Martech 78220S Abrasive Blast Set - Pump Version $835.50
Martech 78220 Abrasive Blast Hood Set $954.60
Martech 78080 Full Mask System with 100' Hose $698.50
Keysco 78025 Vari-Angle Work Table $219.02
Keysco 78015 Prep Station $500.06
Keysco 78014 Mobile Masker 36" $190.45
Keysco 78013 Masker 36" Vertical Plastic $152.35
Keysco 78012 Vertical Masker $167.01